Best Heating and Air Conditioning Repair in Zionsville

You can fix this cheaply if it’s the only problem with your HVAC unit. During peak seasons, filters should be changed monthly to ensure that trapped pollutants aren’t recirculated through your home. A dirty filter makes an HVAC unit work harder because it creates a barrier that impedes airflow. It’s a good idea to change your filter every three months, even if it’s not peak season for your HVAC system. Changing your HVAC filter every 3 months is one of the most common reasons heating and cooling systems fail. If you have a washable filter, you can wash it. You can do this part of preventative maintenance easily.

Airflow is controlled by dampers in the main supply line on most ductwork systems in homes. Some rooms may get heated or cooled much faster than others when dampers aren’t balanced properly, but when dampers are balanced properly, all rooms get heated and cooled equally. We’ll come out to your Zionsville, IN home and inspect your system to make sure you’re getting the proper airflow to each room if you’re not sure if your dampers are properly balanced.

Broken thermostats are the root cause of a lot more HVAC system failures than you might think, and luckily, this is one of the easiest and least expensive fixes. A thermostat is usually not obvious to the occupants and requires the knowledge and experience of a professional to uncover, which is the only bad thing about it. If your thermostat is broken, now would be a good time to upgrade to a smarter one. Thermostats that are smart can save you money and make your life easier.

It’s a common problem with air conditioners, and it can cause poor performance or even no performance at all if the problem is bad enough. When you don’t have enough refrigerant in your air conditioner, it won’t be able to cool incoming air for your home. Low refrigerant levels make the condenser work harder than it should, and that can lead to a breakdown.

Your HVAC unit might not work because the circuit breaker tripped, and the breaker provides electricity to the unit. If you reset the breaker, power might come back on, but it’s also possible that something else caused the breaker to trip.

You might just have had a fluke, but if the breaker trips again, you should call a pro.